BUILDING INSTRUCTIONS

STEP 0: OUR RECOMMENDATIONS

The following instructions explain how to build the recommended structure, but you are of course welcome to modify it according to your wishes.

If you should need help, don't hesitate to CONTACT US : )

STEP 1: PREPARATIONS AND SOURCING

Make sure, that you have a 3D printer and a CNC milling machine (if you shouldn't have one, maybe ask a friend (if you shouldn't have one, maybe try to make some friends) or visit our TRAMANN SHOP).

If you haven't already, please take a look at the requiered PARTS, scroll down to ADDITIONAL PARTS and buy them. If you shouldn't be able to get something from that list, again try friends or visit our TRAMANN SHOP.

STEP 2: PRINTING PARTS

Please print the following PART.

STEP 3: PRINTING TCS PARTS

Please also print the following TCS PARTS.

STEP 4: CARVING PARTS

Please carve the following PARTS and mind that the disks and sticks are carved out of the corresponding plates.

STEP 5: ASSEMBLING

Screw the four directionally adjustable wheels into the plate bottom. Connect all six plates with the ten angle brackets 90, the plate bottom with two each to the plate left and plate right and with one each to the plate front and plate rear and then all around the plate left, plate right, plate front and plate rear with a total of four. Please screw the pyramid less material and the pyramid rounded to the plate front and plate rear. Now insert the four stoppers into the corners of the plate top and place the plate top on the box. The disks and sticks can be assembled into various accessories using the screws and nuts.

STEP 6: FINISHING

Congratulations! You made it, your TAB should now be finished! We are very proud of your accomplishment!


If you are having questions, feedback, ideas, need for support, suggestions, something else?
Always feel free to CONTACT US : )