PARTS

CHANNEL CONVERTER EXTERIOR COVER PLATE EXTERIOR PROTECTIVE FILTER FILTER HOLDER DUO FILTER HOLDER MONO GRILLE HOLDER INTERIOR COVER PLATE SEPARATOR BACKCHAMBER PART 1 SEPARATOR BACKCHAMBER PART 2 SEPARATOR BACKCHAMBER PART 3 SEPARATOR PRECHAMBER

EXTERIOR COVER PLATE

EXTERIOR COVER PLATE

Attach the cover plate frontally on your separator prechamber on the outside.

>> DOWNLOAD STL-MODEL

ADDITIONAL PARTS

FOR EVERY SEGMENT OF HEAT EXCHANGERS YOU WANT TO BUILD
99 straws (outer diameter: 8mm)
1 threaded rod and 2 corresponding nuts (M8 (according to DIN 975))
PVC tube (outer diameter: 125mm, wall thickness: 3.2mm, inner diameter: 125mm - 3.2mm * 2 = 118.6mm (you can also use a DN 125 (according to DIN 8062, row 4) and cut off the bigger ends))
(the length of each part is variable and depends on the thickness of your wall)
some screws

GENERALLY
1 ESP32
1 or 2 HEPA filters (optional, we recommend 2)
1 breadboard or a printed circuit board
1 positive voltage regulator
1 corresponding heatsink
3 10kΩ resistors
3 buttons
2 combined temperature and air humidity sensors
1 OLED display
1 two channel relay module (SRD-05VDC-SL-C)
2 CPU fans
many wires
some screws

REQUIRED TOOLS AND MACHINES
a computer
a 3D printer
a soldering iron
a pair of pliers

We have accessories, individual items, kits (to assemble things yourself), entire products and much more in our TRAMANN SHOP.

Still around? Maybe you want to take a look at HOW A TVS WORKS and the BUILDING INSTRUCTIONS.